Featured Product
EESF® Xorex Corrugated Segment 0.7/50
Xorex Corrugated Segment 0.7/50
-Is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.
Product Data:
- Width: 2 mm ± 0.1 mm
- Thickness: 0.7 mm ± 0.1mm
- Length: 50 mm ± 3 mm
- Tensile Strength: 1200 N/mm2
Featured Product
EESF® AFT Round Wavy Steel Fiber 1.0/55
AFT Round Wavy Steel Fiber 1.0/55
-Is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.
Product Data:
- Width: 1 mm ± 0.2 mm
- Length: 55 mm ± 0.2 mm
- Tensile Strength: 2400 N/mm2
Featured Product
EESF® End Hooked Steel Fiber 1.0/50
End Hooked Steel Fiber 1.0/50
-Is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.
Product Data:
- Width: 1 mm ± 0.5 mm
- Length: 50 mm ± 0.3 mm
- Tensile Strength: 1300 N/mm2
Featured Product
EESF® Macro synthetic Fiber PolyMacro® PM48
Macro synthetic Fiber PolyMacro® PM48
-Has been specifically designed for shotcrete applications and tunnel linings to increase impact and flexural resistance. Homogeneous Fiber distribution makes it possible to absorb energy in any point and any direction of the concrete segment; cracking resistance is considerably improved.
Product Data:
- Aspect Ratio: 1 mm ± 0.5 mm
- Length: 48 mm (min tolerance 2%)
- Tensile Strength: 640 MPa
Featured Product
EESF® Polypropylene Fiber
Polypropylene Fiber
-Increased Reliability and Maximized Service Life for Concrete Linings Fibers improve the crack resistance of concrete structures, making them safer and more reliable over the entire span of service life. They are easy to use and can be directly mixed into concrete, eliminating the time and effort needed to transport and install traditional mesh.
Product Data:
- Elastic Modulus: 4048 – 5674 MPa
- Length: 6 – 8 – 12 – 16 – 18 mm
- Tensile Strength: 467 – 548 MPa
Featured Product
EESF® Glass Fiber (E)
Glass Fiber (E).
-Is a monofilament Glass fibers chopped from type E of glass. The fibers are coated with Silane based to sizing improve initial dispersion and bond. The fibers are extremely fine, single filaments, measuring 13 microns in diameter, cut to lengths of 6, 12, 18 and 24 mm, in accordance with maximum aggregate size considerations and surface appearance requirements.
Product Data:
- Diameter: 13 ± 10%-micron nominal
- Length: 6, 12, 18 and 24 mm
- Tensile Strength: 400 – 450 N/mm²
Approvals & Tests
At EESF, we prioritize quality and safety in all our products. Our steel fibers have been put through comprehensive tests and certified to meet worldwide standards.
Approvals & Tests
EESF prioritizes quality and safety in all our fibers. We have obtained certifications from various organizations and tests in accordance with international standards. Trust EESF for top-quality fibers.